Forklift Training Programs Oshawa

Forklift Training Programs Oshawa - Are you searching for work as a driver of a forklift? Our regulatory-compliant mobile equipment operator training provides instruction in types of forklifts, pre-shift check, fuel kinds and dealing with fuels, and safe use of a lift truck. Hands-on, practical training helps those participating in acquiring fundamental operational skills. Program content comprises current rules governing the utilization of forklifts. Our proven forklift programs are designed to provide training on these kinds of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

How to Handle Loads Safely

Do not lower or raise the fork whilst the forklift is moving. A load should not extend above the backrest because of the danger of the load sliding back in the direction of the operator. Inspect for overhead obstructions and make sure there is adequate clearance before raising a load. Stay away from overhead power lines. When the load is raised straight up, tilt it back slightly.

The lift truck is less steady when a load is in a raised position. Make sure that no body ever walks below the elevated fork. The operator must not leave the lift truck while the load is lifted.

When handling pallets, forks must be level and high enough to go into the pallet and extend all the way under the load. The fork's width must provide equal weight distribution.

Set the brakes and chock the wheels before loading and unloading the truck. The floors must be strong enough to support the weight of both the load and the forklift. Fixed jacks could be installed to support a semi-trailer that is not coupled to a tractor. The height of the entrance door should clear the height of the forklift by at least 5 cm. Mark edges of rail cars, ramps or docks and avoid them.

Do not stay inside a lift truck for long periods without correct ventilation. The inside of the truck must be properly lighted and free of obstructions, trash and loose objects. Check for holes in the floor. The installation of material which are non-slip on the floor will help prevent slipping. Clear whichever obstructions from dockplates and docks and make sure surfaces are not oily or wet.

Lift trucks should not be utilized to tow or push other forklifts.

Click to Download the pdf